What problems should be paid attention to in the work of automatic welding equipment?
Release time:
2022-01-19
【Summary Description】 Due to the requirements of the use of the site or the working environment, today's welding equipment is gradually moving towards automation, and automatic welding equipment is born with the demand of the market. What problems should be paid attention to when working in automatic welding equipment?
With the continuous development of science and technology and the country attaches great importance to the welding industry, China's welding technology has made a great leap in recent years. Due to the requirements of the use site or work environment, today'sWelding equipmentgradually moving towards automation,Automatic welding equipmentIt was born with the demand of the market. What problems should be paid attention to when working in automatic welding equipment?
1. When the automatic welding equipment is working, all inflammable and explosive articles within the working environment should be cleaned up, and attention should be paid to the grooves of the working environment, whether there are flammable liquids and explosive gases in the sewers, and whether it is possible to leak from the ditches and drainage pipes, so as to avoid disasters caused by welding slag and metal sparks.
2, automatic welding equipment in high-altitude welding and cutting, it is strictly prohibited to throw welding rod head, welding and cutting below should be isolated, after the end of the operation to carefully check, confirm that there is no fire hazard before leaving the site.
3. The automatic welding equipment shall strictly abide by the safety operation procedures in the storage, transportation and use of gas cylinders.
4. Pipelines carrying flammable gases and combustion-supporting gases shall be installed, used and managed in accordance with regulations, and operators and inspectors shall carry out safety and Technical Training.
5. When welding fuel containers and pipelines, the welding method should be determined according to the actual situation. When using the replacement method, the replacement should be thorough, the shadow of flammable substances should be strictly controlled during the operation, and a certain voltage should be maintained as required when using the non-replacement method with pressure. The oxygen content should be strictly controlled during operation. It is necessary to strengthen inspection, pay attention to guardianship, and install organizational measures.
The above questions must be kept in mind when operating automatic welding equipment, so that there will be no accidents!
Related News
Telephone:+86-18594983359
E-mail:Firmkim@cn-huaguang.com
Zip Code: 311112
Address: No. 82, Qihang Road, Renhe Street, Yuhang District, Hangzhou City, Zhejiang Province
Douyin QR code
We chat number
WeChat public account