The most important thing to improve the welding process, the maintenance of welding equipment
Release time:
2022-04-08
【Summary Description】 Individuals or enterprises that need to carry out welding operations hope to fully realize the performance and service life of welding equipment. In order to achieve this goal, they need to learn operating procedures and regularly do a good job in the maintenance and repair of welding machines, welding process equipment and welding aids.
Individuals or enterprises that need to carry out welding operations hope to fully realizeWelding equipmentIn order to achieve this goal, it is necessary to learn the operating procedures and regularly do a good job in the maintenance and repair of welding machines, welding process equipment and welding aids.
For welding equipmentAerobic welding gunorOxygen-free welding torchIn general, the maintenance work must first check and replace the conductive nozzle regularly, and clean and replace the spring hose, so as not to cause unstable wire feeding due to accumulation of iron powder and dust. In addition, the insulating ferrule also needs regular inspection. If the nozzle is connected to the live part due to splashing, it may be short-circuited and burned, so the maintenance of the insulating ferrule is also very important.
For the wire feeding device of welding equipment, the pressure should be adjusted. The pressure of the wire feeding roller should be properly adjusted according to the diameter of the welding wire used. If the pressure is too large or too small, it may be scratched or deformed. In addition, the welding wire straightening device and welding wire disc shall be adjusted according to the manufacturer's label to ensure reliable installation. The inspection of wire feeding wheel, wire feeding roller groove and wire guide nozzle should also take into account abrasion and defacement, and regular inspection and maintenance should be carried out.
For the welding machine maintenance of welding equipment, the internal inspection needs special attention, that is, the maintenance inspection needs to be carried out after the power is turned off manually, and the bad parts can be replaced uniformly to ensure better maintenance effect.
The above regular implementation of maintenance and inspection, can greatly reduce the occurrence of welding failure and defective products, regularly spend time on these operations, can extend the service life of the welding machine, increase the efficiency of the operation, is an important maintenance content can not be ignored.
Related News
Telephone:+86-18594983359
E-mail:Firmkim@cn-huaguang.com
Zip Code: 311112
Address: No. 82, Qihang Road, Renhe Street, Yuhang District, Hangzhou City, Zhejiang Province
Douyin QR code
We chat number
WeChat public account